-
CUCrowdhelix User
Looking for Coordinator and Partners for WIDERA – Cooperative Innovation Living Labs
Project Proposal
-
-
ETH Zurich Seeking a PhD student and a Post Doc
Existing Project
The EPSE team at the Department of Mechanical and Process Engineering (D-MAVT), ETH Zurich, is hiring a PhDstudent and a PostDoc. Join and help us...
Learn more...
-
AR- and DT-Assisted Modular Production and Assembly for Modular Wooden Buildings
The AR- and DT-Assisted Modular Assembly platform integrates Augmented Reality (AR), Digital Twin (DT) technology, and 5G/Wi-Fi-enabled data exchan...
This project has received funding from the European Union’s Horizon Europe research and innovation programme under the Grant Agreement 101058505.
Funded by
the European Union -
5G-Driven Non-Conformities Detection and Automated Correction System
The 5G-Driven Non-Conformities Detection and Automated Correction System (BUC 2) is an advanced quality assurance solution designed for modular tim...
This project has received funding from the European Union’s Horizon Europe research and innovation programme under the Grant Agreement 101058505.
Funded by
the European Union -
Introducing GH2ABN: Simulating the Adaptive Hydrogen Supply Chain from Brazil to Europe
Cristina Ponsiglione, Associate Professor at Università degli Studi di Napoli Federico II, presents the GH2ABN model, a simulation that frames the...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them. This project has received funding from European Innovation Council and SMEs Executive Agency HORIZON EIC Grants under grant agreement No 101070721.
Funded by
the European Union -
Harnessing the Full Solar Spectrum: Advanced Catalysts for Green Hydrogen and Chemical Production
Xi Li from University College London discusses innovative research from the GH2 project, addressing the transformation from fossil fuel dependence...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them. This project has received funding from European Innovation Council and SMEs Executive Agency HORIZON EIC Grants under grant agreement No 101070721.
Funded by
the European Union -
GH2 Project's Ethanol-to-Hydrogen Platform: Unlocking Dual Value Streams for Green Hydrogen and Sustainable Chemical Production
Inga-Marie Lahrsen from ETH Zurich outlines the technological and economic rationale behind the GH2 project’s innovative approach to green hydrogen...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them. This project has received funding from European Innovation Council and SMEs Executive Agency HORIZON EIC Grants under grant agreement No 101070721.
Funded by
the European Union -
Using Workshop-Based Elicitation of Business Requirements for Co-Creation: An Integrative Approach for Capturing Tacit Knowledge
Well-conducted requirements engineering (RE) activities account for a significant share of success in IT projects (Wiegers and Beatty, 2013). The R...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Health and Digital Executive Agency (HaDEA). Neither the European Union nor the granting authority can be held responsible for them.
Funded by
the European Union -
Digital Solutions to Support Transition from Linear to Circular Manufacturing
The transition from linear to circular manufacturing systems (CMS) is essential for manufacturing firms aiming to enhance sustainability and mitiga...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Health and Digital Executive Agency (HaDEA). Neither the European Union nor the granting authority can be held responsible for them.
Funded by
the European Union -
Angle of Arrival/Departure Localisation (AoADL) and Camera Based Localisation solution
The combined Angle of Arrival/Departure Localisation (AoADL) and CameraBased Localisation solution is a 5G-enabled, high-precision indoor positioni...
This project has received funding from the European Union’s Horizon Europe research and innovation programme under the Grant Agreement 101058505.
Funded by
the European Union -
Digital Solutions support Circular Economy: New strategies and methodologies compared | Session #1
An engaging discussion, divided in three appointments, on how digital solutions can support the circular economy. These webinars will explore pract...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Health and Digital Executive Agency (HaDEA). Neither the European Union nor the granting authority can be held responsible for them.
Funded by
the European Union -
Demo site to the Open access digital platform
The OADP platform is an open access platform with the purpose to solve general data sharing, management and publication issues for multiple organi...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Health and Digital Executive Agency (HaDEA). Neither the European Union nor the granting authority can be held responsible for them.
Funded by
the European Union -
Ceramic Filler “mRefFerro” Produced by ReSoURCE "Refractory Sorting Using Revolutionising Classification Equipment" Project
The project ReSoURCE strives to innovate the full process chain of refractory recycling with an AI-supported multi-sensor sorting equipment as its...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them. This project has received funding from the European Union’s Horizon 2020 or Horizon Europe research and innovation programme under grant agreement No 101058310.
Funded by
the European Union -
Ceramic Filler “mRefCem” Produced by ReSoURCE "Refractory Sorting Using Revolutionising Classification Equipment" Project
The project ReSoURCE strives to innovate the full process chain of refractory recycling with an AI-supported multi-sensor sorting equipment as its...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them. This project has received funding from the European Union’s Horizon 2020 or Horizon Europe research and innovation programme under grant agreement No 101058310.
Funded by
the European Union -
CLEAN AIR IN INDUSTRIAL APPLICATION - THE PADUA (ITALY) INCINERATOR
The installation was carried out inside a HERA Group waste-to-energy plant, at the incineration furnaces, which are environments characterized by a...
-
Active Biodegradable Packaging
Background - Active and intelligent packaging are new packaging with a disruptive effect on the food industry, capable of improving the traceabilit...
-
Zero Wine Waste with Microalgae Processes
Background - Viticultural waste refers to the solid organic waste produced during the various stages of wine making, throughout the year. Lees, to...
-
Representative sampling of spent refractory material to train sensors for automated sorting (project ReSoURCE)
To achieve circular economy goals and to reduce the carbon footprint of refractory products, the recycling rate of spent refractory material has to...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them. This project has received funding from the European Union’s Horizon 2020 or Horizon Europe research and innovation programme under grant agreement No 101058310.
Funded by
the European Union -
New design of PCM inserts for thermal storage applications
A hybrid thermal energy storage system, consisting of a combination of passive and active heat transfer enhancement techniques, is to be developed...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them. This project has received funding from the European Union’s Horizon 2020 Research and innovation action (RIA) under grant agreement No 884411.
Funded by
the European Union -
SunDial: a solar collector adaptable to different industrial processes demanding heat at different temperature
The proposed system, namely SunDial, is based on the Linear Fresnel Reflector (LFR) technology, which is considered as the most promising one for...
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them. This project has received funding from the European Union’s Horizon 2020 Research and innovation action (RIA) under grant agreement No 884411.
Funded by
the European Union
